Loading

Loading job, please wait...

Loading

Loading job, please wait...

Enter wall length

m
●		cm
 
ftin

Please select a width for this plan

Please select a seam option to base this plan on

Colour-match: a piece can go on any of the following widths

With this option, any piece can go on any roll width. Colour match is assumed: One part of a room may go on roll width 1 and another on width 2; stairway pieces will be spread across roll widths, for best efficiency. Planning time will increase, so only use this option when lower wastage is likely and the customer chosen material is available in colour match.

Please select a width to find seams for

Select seams manually

This door leads to:

Apply to all doorways/risers in this area

Please enter a pattern match

Having centring in 2 different
rooms gives fitter a difficulty.
Please write a note to fitter
apologising

Greened fields are required

Apply to all Apply to all

Notes to fitter

Directions

Parking

Directions

Parking

Pack size

Hello
Hello

Please select a store

Conversion status:

Convert to normal job for estimator

Copy library
To create library

Source name

Please select the stores you work with

Product name
Apply to

This will add a single doorbar to the area selected. Cost Breakdown will show the total number of doorbars of this type applied
Doorbar name
Apply to

Discount name Amount

Apply to

Product type
Product name
Name as imported
Abbreviated name
Doorbar type
exc VAT inc VAT
Price Margin
Cost Markup
Min quantity is
Contingent on fitting inspection
Units Quantify by
Length Width Pack size (sqm)
Category
Product code
Is assoc. charge
Assoc charge code
Is minimum charge
Min charge product codes (if there are several, separate codes with commas)
Min charge type
Exclude rooms with codes (separate codes with commas)
Min charge threshold
Min charge condition
Sort priority
Apply by default to
Carpet
This is the item which gets applied by default to carpet
(to apply a different default, edit the product you want to beome the new default)
Vinyl
This is the item which gets applied by default to vinyl
(to apply a different default, edit the product you want to beome the new default)
Wood or laminate
This is the item which gets applied by default to wood/laminate
(to apply a different default, edit the product you want to beome the new default)
Vinyl tile
This is the item which gets applied by default to vinyl tile
(to apply a different default, edit the product you want to beome the new default)
Carpet tile
This is the item which gets applied by default to carpet tile
(to apply a different default, edit the product you want to beome the new default)
Click LVT
This is the item which gets applied by default to Click LVT
(to apply a different default, edit the product you want to beome the new default)
Stone
This is the item which gets applied by default to Stone
(to apply a different default, edit the product you want to beome the new default)
Porcelain
This is the item which gets applied by default to Porcelain
(to apply a different default, edit the product you want to beome the new default)
Successful clean
This is the item which gets applied by default to successful clean
(to apply a different default, edit the product you want to beome the new default)
Sanding and seal
This is the item which gets applied by default to sanding and seal
(to apply a different default, edit the product you want to beome the new default)
Wood
This is the item which gets applied by default to wood
(to apply a different default, edit the product you want to beome the new default)
 Applicable to
Carpet
Vinyl
Wood or laminate
Vinyl tile
Carpet tile
Click LVT
Stone
Porcelain
Successful clean
Sanding and seal
Wood
Apply by default
This is the item which gets applied by default.
(to apply a different default, edit the product you want to beome the new default)
For purposes of ballpark estimating apply by default to
Carpet
This is the item which gets applied by default to carpet
(to apply a different default, edit the product you want to beome the new default)
Vinyl
This is the item which gets applied by default to vinyl
(to apply a different default, edit the product you want to beome the new default)
Wood or laminate
This is the item which gets applied by default to wood/laminate
(to apply a different default, edit the product you want to beome the new default)
Vinyl tile
This is the item which gets applied by default to vinyl tile
(to apply a different default, edit the product you want to beome the new default)
Carpet tile
This is the item which gets applied by default to carpet tile
(to apply a different default, edit the product you want to beome the new default)
Click LVT
This is the item which gets applied by default to Click LVT
(to apply a different default, edit the product you want to beome the new default)
Stone
This is the item which gets applied by default to Stone
(to apply a different default, edit the product you want to beome the new default)
Porcelain
This is the item which gets applied by default to Porcelain
(to apply a different default, edit the product you want to beome the new default)
Successful clean
This is the item which gets applied by default to successful clean
(to apply a different default, edit the product you want to beome the new default)
Sanding and seal
This is the item which gets applied by default to sanding and seal
(to apply a different default, edit the product you want to beome the new default)
Wood
This is the item which gets applied by default to wood
(to apply a different default, edit the product you want to beome the new default)
Level applied
Can only be applied to stairways
Ignore first in when calculcating amount
Stairway must have at least treads
Fitting must be done in later part fit
Don't itemise on estimate
Notes
D2C
Amalgamate when sending to Business Central
Used by

Name
Colour
Price per

Material type
Material subtype
Name
Colour
Collection
Range
Form
Price
exc VAT inc VAT
Manufacturer
Products

Warning! Changing the settings below will change them for all users in your organisation, and may impact previous jobs as well as new ones. Only make changes to settings if you are confident that you know what you are doing. Seek advice from Masterpiece support at support@masterpiece-system.com if you are not sure.
VAT rate Fitter paid directly, no VAT applied to labour Currency Uses invoice
Labour margin (%) Leave this field blank if you wish to enter individual cost prices for each item
Show VAT separately on est. Can change this for individual jobs
Show VAT separately on invoice Can change this for individual jobs
Capture payments
Estimate title
Estimate intro
Estimate outro
Invoice title
Invoice intro
Invoice outro
Show room table on estimate
Show room table on invoice
Show cost prices on internal costing
Use fitter invoice
Default mat allowance (m)
Def diagonal pack allowance (%)
Def straight pack allowance (%)
Def diagonal uniform tile allowance (%)
Def diagonal random tile allowance (%)
Def straight uniform tile allowance (%)
Def straight random tile allowance (%)
Planned length rounding (cm)
Estimate email subject
Estimate email body
Invoice email subject
Invoice email body
Confirm emailed estimates by SMS
SMS sender ID
SMS text
SMS link expiry (hours)
Payment policy
Acceptance deposit percent

Incorrect password

Does this offer have a firm price for labour?
Apply a +/- band of %

Invalid invoice no

Sample taken       Burn test done   
Observation about damaged material Selected material library data
Fibre type
Construction/style
Backing type
Stitch count
Gauge count
Tufts
Pile height
Ply
Weight (oz/SqYd)   to  

Signatory name

Roll width

Fitting charge for

Please enter an acceptance status for each offer

Estimate notes

Estimate intro

Show discount info

Bullnose type

Please select a sales quote for this pricing. Your selection here should bear two things in mind:

Best price to customer. If you select a sales quote then the 'Get pricing' will generate the best price to the customer between the discount available at time of quote and the discount available today. (You can always try each sales quote in turn and see which generates the lowest price)

Taking account of deposit already paid. If you select a sales quote which has a deposit, then the quote emailed to the customer by Business Central will subtract the deposit from what the customer is asked to pay. This will avoid the store having to refund the deposit.

Quote no

Is the height/width ratio roughly correct?

Please select the room group, shape and sizes of the shapes you want to delete

Welcome to MasterPiece!

Please enter your user name

Welcome to MasterPiece!

You are now logged out
Store
Customer will select mats in home
Estimator will quote job in home
Customer wants ballpark quote and/or has brought measurements and/or floor plan image is available Customer has brought in measurements/floor plan image
No of levels No of bedrooms
Property type Has bay windows

v10.1676

 Select Rooms

Please select the rooms which require new flooring (hint: for 2 bedrooms click the bedroom button twice)

Selected rooms (click to remove any room selected by mistake)

Please select some rooms

OK

 Distinguish Rooms

Please enter a description which distinguishes rooms of the same name

Hint: For bedrooms you could enter 'Suzie's room', or else 'Front', 'Back', 'Guest', or 'Main'. For en-suites you could enter 'For main bedroom' or 'For guest room'.

Please add a description for all rooms with the same name

OK

 Identify Floor Levels

Please say what level of the building each room is on

Hint: If rooms within one floor vary slightly in height (e.g. there is a couple of steps up to get from one room to the next) then assign all these rooms to the same floor.

Please enter a level for all rooms

OK

 Identify Stairway Levels

Please say where each stairway starts from and goes to

Stairway Room at bottom Level at bottom Room at top Level at top No of 'ups' to room above Type of steps

Select Room Which Will Not Be Given Flooring

Please select a name for this room which will NOT be given flooringShow more

Please walk up the stairway from bottom to top, counting the number of 'ups' that you do.

Please enter top and bottom rooms for all stairways

OK

 Select Material Type

Please select the material type for each room

Please select the material type

Please enter a material type for all rooms

OK

 Draw roomsConnection assumedCheck internet connection

Optimise for...

Units

Current roll width

Allowance left/right

Allowance up/down

Lay direction

Lay uniformity for area

Allowance

Moisture reading

Room info

Resizing

Select room

      Please walk up the stairway again from bottom to top, counting the number of 'ups' that you do

      The number of 'ups' is
      OK

      Please choose a room to draw

      Hello

      OK

      Please indicate any pile constraint for this room
      With a constraint the pile direction is fixed, no rotation is possible.

       Floor planConnection assumedCheck internet connection

      Pan

      Warning! Some doorways are mispositioned

         Settings>

        Input using

        Estimate type

        Units

        Guidance

        Seam selection method

        Stairway sanity checks

        Disallow stairways with less than steps
        Disallow stairways with more than steps
        Warn if stairway has less than steps
        Warn if stairway has more than steps

        Material types

        Viewport scale (current screen size is)

        Plans

        Cut plan Assess wastage Use 1 less pack Use 1 more pack Replan Manually adjust Delete

        Total material area
        Wastage % (efficiency %)
        Tot underlay (if all have)
        Tot gripper (if all have)
        Heat seam

        Room Net area Underlay Req Gripper Req
        Cut Length x width
        Total material area
        Total net room area
        No of packs
        Wastage % (efficiency %)
        Tot underlay (if all have)
        Tot beading (if all have)
        Room Net area Underlay Req Beading Req

        View/edit Cut plan Assess wastage Manually adjust Delete

        Total material area
        Wastage % (efficiency %)
        Tot underlay (if all have)
        Tot gripper (if all have)
        Heat seam

        Room Net area Underlay Req Gripper Req
        Cut Length x width
        No plans requested

        All Jobs Privacy 

        Sort by Started between and Visit date between and Jobname
        Postcode Address Job ref Order sys ref Invoice no Est no Job ID Exported to Pulse Include archives
        Store Estimator

        This search returned a large number of jobs so not all jobs are being shown. Please narrow your search criteria

        ID Job Name Date started Ref/desc Estimator Status Address Postcode Visit date Store Store to fit Order sys ref Last saved locally Last saved on server Owner Archive Total payable Balance remaining Fitting date Products ordered Products received Invoice no
        Open Delete

        Admin Fitter booking

        Stairway builder

        Component Open Treads Width Runner width Height
        Top  
        		 Add rung to top
        Bottom          		 risers in total Add rung to btm
        		Confirm Del
        Step type Has runner Use
        Stairway wizard
        Dragging
        Available pieces
        Flight
        Quarter landing left
        Quarter landing right
        Half landing left
        Half landing right
        4 winder set left
        4 winder set right
        3 winder set left
        3 winder set right
        2 winder set left
        2 winder set right
        Bullnose, both
        Bullnose, both
        Bullnose, left
        Bullnose, right
        Bullnose, left
        Bullnose, right

        Info Delete all empties
        Clear stairway X.XXm for flights
        Moisture
        Labour items
        Select room

            Breakdown

            Get pricing Pricing confirmed
            View
            Item Req Price exc VAT Price inc VAT Total exc VAT Total inc VAT
            Ed
            exc VAT inc VAT
            Mats/accs
            Labour
            Total

            Materials

            -->
            Area Plan Avail Material Colour Pattern Repeat across Along
            1 avail Pack size
             

            Offers

            Store Store to fit Estimator Fitter Fitting date Fitter not emailed
            Ordered Received
            Conversion status Accepted offer
            Reason
            Show deleted estimates
            Show VAT separately on estimate Show VAT separately on invoice
            Selected offer 1 avail This is not the accepted offer!
            exc VAT inc VAT
            Mats/accs tot
            Labour total
            All up tot

            Fitting sheet

            Estimate

            Library
            Product type Doorbar type Sort by Name filter Product code filter
            ,
            Type Name Price Inc VAT Cost Category Product code Assoc. lab charge Default Applicable to Min charges Doorbar type Length Ballpark default
              ↕  

            Type Name Colour Product code Price to
            Manufacturer Collection Range Style/construction One-offs D2C
            Tile type Tile length Tile width
            Backing Fibre type Fibre content
            Stitch count Gauge count Tufts +- Ply Pile height +- Pile weight to Oz/SqYd
            Name Colour Type Price exc VAT Price inc VAT Widths Manufacturer Product code Collection Range Form Subtype Style/Construction Backing Fibre type Fibre content Stitch count Gauge count Tufts Pile height Ply Weight Oz/SqYd Tile type Tile length Tile width No in pack

             Manual plan

            Pan

             Edit material

            Type Subtype
            Name
            Colour
            Manufacturer
            Collection Range
            exc VAT inc VAT
            Price Margin
            Cost Markup
            Product form
            Pack size
            Prices entered are per
            Product code
            Tile type
            Tile length (mm)
            Tile width (mm)
            No in pack
            Notes - shown on int costing but not estimate
            Notes - shown on estimate but not int costing
            D2C
            One off item
            Backing
            Style
            Fibre type
            Fibre content
            Stitch count
            Gauge count
            Pile height
            Ply
            Weight

             Edit product

            Name
            exc VAT inc VAT
            Price Margin
            Cost Markup
            Apply to

             Add material information

            Please enter material information for each area

            Mat name Colour
            Notes

            Previsit sheet

            Labour items

            Please enter the number of items to apply to this area

            Note that if you add more of this item at Cost Breakdown or to another stairway, then what will be shown here is the overall amount for the area

            Store
            Name Staff ID Store

             Edit salesperson

            Name
            Staff ID
            Store

            Name Product library Is default

             Edit source

            Name
            Product library
            Is default

            Store
            Name ID Email Tel Postcode Hourly rate Stores

             Edit fitter

            Name
            ID
            Email
            Tel
            Postcode
            Hourly rate

             Payments

            Total amount due Ballpark price given in store Total normally due at acceptance
            Fitting date Fitting complete

            Notes

             Coverage

            Total net room area
            Design Stripping Key squares Lay uniformity Mismatch with room value
            Border Perimeter
            Perimeter depth From edge of room to outer edge of border (will apply to all rooms of area)
            Perimeter length Border depth: Net area outside central field: - calculated using perimeter length x (perimeter depth + border width)
            Central field net area
            Tile for field area Net area to be covered Area with allowance
            Material Colour Pack size
            No of packs Coverage Wastage Allowance Average across all rooms, before rounding to packs
            Notes for fitter only Notes for estimate and fitter
            Stripping Length required
            Material Colour Pack size
            No of packs Coverage Wastage
            Key squares
            Material Colour Tile size
            No of packs Coverage Wastage
            Border
            Material Colour Tile length
            No of tiles Coverage Wastage
            Has decorative corners
            Corners
            Corners Colour Tile size
            No of tiles
            Perimeter
            Material Colour Pack size
            No of packs Coverage Wastage

             Accessories and services

            Product type

            Name Description Type Amount Products applicable to Materials applicable to

             Edit discount

            Name
            Abbreviated name
            Discount code
            Description
            Discount type
            Amount
            Products applicable to
            Mat types applicable to
            Carpet
            Vinyl
            Wood or laminate
            Vinyl tile
            Carpet tile
            Click LVT
            Stone
            Porcelain
            Successful clean
            Sanding and seal
            Wood
            External system

            Name Code Text Is default

             Edit clause

            Name
            Code
            Text
            Automatically apply to jobs

            Photo report